Get Down in 5: Experience Rapid Pre-Cool with ECO FastBlast

Date:2024-11-23
Pageviews:113

In laboratory applications, centrifugation is one of the most critical core technologies. To preserve sample bioactivity and reduce instrument noise, the demand for refrigerated centrifuges is growing. However, most refrigerated centrifuges cool down slowly, requiring a lengthy pre-cooling period, which causes inconvenience for lab personnel.


Leveraging advanced cold chain storage technologies, Haier Biomedical introduces the ECO fastBlast benchtop and mini refrigerated centrifuges. These products effectively address high energy consumption issues and feature efficient pre-cooling technology, enabling rapid cooling within minutes, setting industry-leading performance standards.


N 11.23-01.png


Fast Cooling, Efficient Operations


ECO fastBlast cools from 21°C to 4°C in just 5 minutes, 22 minutes faster than others, improving efficiency by over 81%. This rapid cooling supports on-demand operation, allowing safe shutdowns between experiments and swift restarts, reducing wait times and boosting overall lab productivity.


N 11.23-02.png


Energy-Saving Leader, Reducing Energy Consumption


Conventional refrigerated centrifuges consume significant energy, with 70% attributed to their cooling systems. ECO fastBlast consumes only 0.071 kWh per pre-cooling cycle, saving 43% energy compared to standard models. The mini centrifuge uses just 0.018 kWh per cooling cycle, cutting energy consumption by up to 65% compared to competitors. Running three pre-cooling cycles consumes 88% less energy than keeping the device continuously cooled for 8 hours.


N 11.23-03.png


Lower Emissions, Eco-Friendly


Reducing energy consumption during pre-cooling significantly cuts CO2 emissions. On-demand operation reduces energy use by 88%, minimizing the carbon footprint and supporting sustainable research practices.


Cost-Saving and Budget-Friendly


For a mini centrifuge running 8 hours a day, 5 days a week, annual electricity costs total approximately 24.5 yuan. ECO fastBlast, running three times a day, costs just 18 yuan annually, saving up to 88%. Shorter operating times also reduce maintenance and repair costs, extending the device's lifespan.


N 11.23-04.png


ECO fastBlast Pre-Cool Highlights:


▪ 5-minute pre-cooling, ultra-fast.

▪ Cooling speed increased by 82%.

▪ Energy consumption reduced by 65% during cooling.

▪ On-demand operation cuts energy use by 88%.

▪ Carbon emissions lowered by 88%.

▪ Annual electricity costs reduced by 88%.

Turn off the centrifuge, reduce emissions, and activate energy-saving mode! Choose Haier Biomedical's ECO fastBlast to make your lab more efficient, energy-saving, and eco-friendly!